Deck Jak- tile support -Urban Building Products Ltd.
28th August 2010 · 0 Comments
Deck Jak- tile support -Urban Building Products Ltd.
Material: Polypropylene
Colour: Black
Base Diameter: 105mm
Minimum Height: 65mm * This is able to be cut down by arrangement; minimum height 25mm. (These can be hand cut shorter on site as necessary. The 25mm is merely a limitation of our cutting jig)
Maximum Height (Deck Jak™ only): 105mm
Maximum Height (Deck Jak™ and Deck Jak™ Spacers): 400mm +
Fin Width: 3mm – Narrow Fin
Fin Width: 8mm – Wide Fin (For use with Tile-on-Compressed-Sheet only)
Deck Jak™ Spacer Diameter: 110mm
Deck Jak™ Spacer Height: 20mm & NEW 50mm Spacer (Combinations of these are able to be stacked under the Deck Jak™ tile support to achieve the desired height)
NOW IN STOCK
* 200mm diameter base that can be placed under the Deck Jak™ tile support or the Deck Jak™ Spacer
Wall spacers: There are 3 basic types (more) that ‘lock’ the walking surface in place. They also allow a 6mm drainage gap, without becoming a trip or ‘high heel’ hazard, especially at doorways
Maximum Fall under the Deck Jak™ System (to allow a level pedestrian surface):
The Deck Jak™ will achieve 1:30 = approx 33mm/m = 2° by means of the “sloppy thread” which allows the top to pivot within the base. This becomes immobile once the deck is laid.
NOW IN STOCK
* 200mm diameter base has an inbuilt fall that will double the fall compensation to 4°.
Load Testing Maximum Weights:
* Fins: 1055kg
* Screw Thread: 3298kg
* 330 x 330 ceramic tile on 18mm compressed sheet: 867kg
* Chair leg on corner of ceramic tile on 18mm compressed sheet: 511kg shear
* 300 x 300 concrete paver (green): 596kg
* Chair Leg on 300 x 300 paver (green): 410kg
Urban Building Products Ltd
9E Piermark Drive
Albany
North Shore 0630
♦ Mailing Address:
Urban Building Products Ltd
P.O.Box 93
Greenhithe
North Shore 0756
♦ Contact Details:
Phone: 09 414 5567
Fax: 09 414 5569
Email: info@deckjak.co.nz
Readers Comments (0)
Comments are closed.
